SHORT COURSE SUPREMACY
Traxxas rocked the world 15 years ago with the release of the Slash, launching a short course revolution and a generation of enthusiasts that have propelled Slash to become the best-selling truck in RC. Now, Slash is going even bigger. We MAXXed the Power, Size, Durability, and Excitement!
Batteries & Charger are not included, these are the compatible batteries and chargers:
Compatible Lipo Batteries:
- Traxxas 2842X 5000mAh 7.4v 2-Cell 25C LiPo Battery
- Traxxas 2843X – 5800mAh 7.4v 2-Cell 25C LiPo Battery
- Traxxas 2869X – 7600Mah 7.4V 2-Cell 25C Lipo Battery
- Traxxas 2872X – 5000mAh 11.1V 3-Cell 25C LiPo Battery
- Helios 11.1V 3S 5200mAh LiPo with Traxxas Plug
Compatible Nimh Batteries:
Compatible Chargers:
- Traxxas 2970 – Ez-Peak Plus 4-Amp Nimh/Lipo Fast Charger With Id Auto
- Traxxas 2971 – EZ-Peak Live 100W NiMH/LiPo charger (2971A)
- Traxxas 2972 – Charger, EZ-Peak Dual, 100W, NiMH/LiPo with iD Auto Battery Identification
- Traxxas 2973 EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W)
- Traxxas 2981 – EZ-Peak Plus 4s Charger
Completer Packs:
- Traxxas 2990 – 2 of 3s 5000mah Battery/Charger Completer Pack
- Traxxas 2991 – 2 of 2s 7600mah Battery/Charger Completer Pack, Includes Ez Peak Dual Charger X 1 And 2-Cell 7600 Mah Lipo Batteries X 2
NB: Requires two batteries to run
NB: Some batteries may require a battery expansion kit to fit properly.
- VXL-6s Waterproof Electronic Speed Control
- 6s LiPo compatible
- Integrated cooling fan
- Real-time telemetry via Traxxas Link
- 3-LED status indicators
- Powered accessory ports
- 10-gauge silicone wire
- Integrated protection circuits
- Velineon 2000 kV Brushless Motor
- 4-pole 2000 kV
- 5 mm output shaft
- Finned can for better heat dissipation
- Fixed-Mesh Motor Cradle
-
- Supports entire motor length
- Reduces flex for longer gear life
- 70+ mph with Optional Gearing and Two 3s LiPo Batteries (sold separately)
- Traxxas Stability Management
- Improves straight line acceleration and braking on low-traction surfaces
- Never dulls throttle or slows the truck
- Adjusts from off to 100% assistance from the transmitter
- TQi 2.4 GHz High Output Radio System
- TQi 2-channel transmitter
- Traxxas Link enabled
- 2.4 GHz 5-channel micro receiver (6533) with fail-safe security and integrated telemetry ports
- Automatically stores and loads settings for up to 30 Traxxas Link-enabled modelsjust switch on and drive, model selection is not required
- Programmable Multi-Function knob
- Adjustable steering and throttle percentage (dual rates)
- Adjustable steering and throttle sensitivity (exponential)
- Adjustable steering and throttle end points
- Clipless Body
- Quick and secure installation and removal
- Managed airflow for improved high-speed stability
- Rigid internal frame
- Additional nerf bar side support
- Eliminates body posts and clips
- Molded body reinforcements for tear-through protection
- Drivetrain
- Full-time shaft-driven 4-wheel drive
- Torque-Biasing Center Drive
- Absorbs shocks and distributes power
- Aluminum housing
- Sealed, silicone fluid-filled diffs with large module ring and pinion gears
- Steel pinion and spur gear
- Heavy-duty Cush Drive
- Steel-Core hybrid telescoping driveshafts
- Splined aluminum center driveshaft
- Modular Low-CG Composite Chassis
- Extended modular chassis design interlocks with front and rear bulkheads
- Absorbs and distributes impact energy
- Molded-in hex reinforcements on flat surfaces
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt and grit
- Easy Battery Access
- Large battery compartment with secure snap-lock battery door
- Accepts single 6700 mAh 4-cell LiPo battery or dual 5000 mAh 3s LiPo batteries
- Batteries are protected deep in the chassis
- More secure than conventional retention systems
- Heavy-Duty Steering Bellcranks and Servo
- Large-scale high-output steering servo
- 285 oz-in of torque
- 0.18 sec transit speed
- Triangulated mounting system to fully support case
Heavy-duty double-shear bellcranks
- Suspension
- Heavy duty double-shear suspension arms
- Tough composite formula resists impact damage, even in cold weather
- Engineered to optimize suspension travel and steering angles
- All critical suspension points have double shear strength
Steel pivot balls
- C-hub and steering block geometry maximizes steering angle
- Fixed, high-strength camber and toe links
- Steel upper and lower tie bars
- GT-Maxx Shocks
- Machined aluminum threaded body
- Extra-large bore and capacity
- Large-diameter damper shaft
- Lower seal cartridge with dual X-rings
- Adjustable upper spring retainer
- Plastic shock caps with pivot balls
- Lower spring perches bolted on
- Bumpers
- Heavy duty energy absorbing front and rear bumpers
- Lower front and rear skids for impact and abrasion resistance
- Integrated nerf bars for side impact resistance
- Adjustable wheelie bar with integrated carry handle
- Wheels & Tires
- Tough dual-profile wheels with keyed 17 mm hex receptor
- Large 5.3 Maxx SC belted tires
- Limits tire expansion for game-changing performance
- 1-piece foam inserts
- Pre-glued and ready for action
Model Name: |
Maxx Slash 6s Short Course Truck |
Model Type: |
Short Course Trucks |
Model Speed: |
70+ mph with Dual 3s LiPo batteries and optional pinion gear (sold separately) |
Model Skill Level: |
4 |
Scale: |
1/8 |
Weight: |
10.34 pounds (4.69 kg) |
Length: |
26.5 inches (674 mm) |
Width: |
14.3 inches (363 mm) |
Front Track: |
14.3 inches (363 mm) |
Rear Track: |
14.3 inches (363 mm) |
Height: |
9.64 inches (245 mm) |
Wheelbase: |
15.5 inches (394 mm) |
Center Ground Clearance: |
1.54 inches (39 mm) |
Drivetrain: |
Shaft-driven 4WD |
Transmission: |
Single speed |
Differential Type: |
Sealed, hardened steel bevel, limited slip |
Gear Ratio (Internal): |
11.38:1 |
Gear Pitch: |
1.0 metric pitch |
Servo(s): |
2090 digital high-torque waterproof (285 oz-in) |
Radio System: |
TQi 2.4 GHz transmitter with TSM receiver |
Battery Compartment Specs: |
181 mm X 56 mm X 45 mm |
Reviews
There are no reviews yet.